Description:

Multifunction Vise with Anvil, 3-1/4” / 80mm Jaw Width IN-GBV-0157

*Multifunction vise with anvil, 80 mm jaw width*

This solidly manufactured vice made of cast steel has a base with basic dimensions of 135 x 100 mm and can be screwed firmly to a workbench or the worktable of a drill using two long holes. The top of the vice is ground to an area of ​​80 x 80 mm. Four rotatable locking pins allow cylindrical workpieces with diameters from 75 to 150 mm to be clamped. With the help of the prisms milled into the jaws, shafts or other cylindrical workpieces with diameters of 4 to 20 mm can be clamped both horizontally and vertically. The anvil and vise jaws are hardened.

PRODUCT DESCRIPTION

3” Jaw Width

3.75” Jaw Opening

1.75” Throat Depth

.25” - 3” Pipe Jaw Capacity (Main Jaws) 6" Pipe Capacity Using Mounting Horns

3-1/8” Square Anvil Work Surface

4 Mounting Horns (pins) for gripping odd shaped work pieces

Two Side Mounting Slots

Horizontal and Vertical V-Groove Jaws

High Strength Grey Iron Castings

Knurled Main Handle for Grip